BVMMR - S-DINE JOINER-W PART B, POLYAMINE

  • MSDS: BVMMR
  • Manufacturer: KANEBO NSC LTD
  • Product Name: S-DINE JOINER-W PART B, POLYAMINE
  • National Stock Number: 8010-00N052551
Product Identification

Product ID:S-DINE JOINER-W PART B, POLYAMINE
MSDS Date:05/20/1993
FSC:8010
NIIN:00N052551
Kit Part:Y
MSDS Number: BVMMR

Responsible Party
KANEBO-NSC LTD
1-6-5 SEMBA-NISHI MINOO-SHI
OSAKA 562, JAPAN
US

Emergency Phone: 0727-28-4701; 503-256-3455

Info Phone: 0727-28-4701; 503-256-3455

Cage: IO847

Contractor
KANEBO-NSC LTD
OSAKA 562, JAPAN US

Telephone: 0727-28-4701; 503-256-3455

Cage: IO847

Ingredients

NONHAZARDOUS INGREDIENTS; (POLYAMINE RESIN)

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSES SEVERE BURNS, CONTAINS ALKALINE
AMINES, STRONG SENSITIZER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:THOROUGHLY WASH EXPOSED AREA W/SOAP & WATER. EYE:FLUSH
W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION. INGEST:DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
INHAL:REMOVE TO FRESH AIR.

Fire Fighting

Flash Point:437F,225C
Extinguishing Media:FOAM OR CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:CLEAN AFFECTED AREA W/CLOTH OR ABSORBENT
PAPER. FLUSH W/LARGE VOLUME OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL PLACES, KEEP CONTAINER
CLOSED WHEN NOT IN USE. AVOID SKIN & EYE CONTACT. DO NOT TAKE
INTERNALLY.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . USE OF ADEQUATE VENTILATION RECOMMENDED.
Ventilation:LOCAL EXHAUST OR MECHANICAL HIGHLY RECOMMENDED.
Protective Gloves:DISPOSABLE PLASTIC OR RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER (SUPP DATA)
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER WHICH
MEET ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER. EYE PROT: GOGGLES WITH FULL LENGTH
FACESHIELD .

Chemical Properties

Spec Gravity:1.5
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NITROGEN OXIDES, CO, CO*2.

Disposal

Waste Disposal Methods:INCINERATE OF LANDFILL I/A/W LOCAL, STATE &
FEDERAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.